GALLON - This is an economical chemical concentrate designed for screen printing. Emulsion remover removes the stencil from the screen so you may reuse the mesh for another printing job. It will dissolve hardened and cured emulsion. Works with dual cure and photopolymer emulsions. This emulsion remover performs well and is safe for city water treatment systems. This concentrate is suitable for dip tanks or other re-circulatory systems.
1 gallon dilutes to 15-20 gallons depending on what strength you want the finished solution. Add 1 gallon of emulsion remover concentrate to 15 gallons of water for a standard ratio. Add 1 gallon of emulsion remover concentrate to 20 gallons of water for a more diluted ratio.
LER - 40, Emulsion Remover Concentrate. This product is designed for all direct liquid emulsions, and capillary films. Photopolymer and diazo dual cure usage. Avoid contact with eyes and skin. Wear protective eyewear and clothing
during usage. Wash hands thoroughly after use or handling.
USAGE: *SHAKE WELL BEFORE EACH USE* This product is designed for all direct liquid emulsions, and capillary films. Photopolymer and diazo dual cure usage. Safe for all mesh types. City water treatment safe. CA compliant when used properly. Biodegradable.
FIRST AID: Eyes - Flush with water for 15 minutes, seek medical attention if irritation persists. Ingestion - Drink large quantities of water and seek medical attention immediatley. Skin - Wash with soap and water. Seek
medical attention if any irritation occurs.