Loading... Please wait...

SaatiChem Textil PV Emulsion Gallon

  • Image 1
Price:
$85.00
Brand:
Shipping:
Calculated at checkout


Product Description

GALLON - Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Water resistant when post exposed. Requires no mixing!Excellent print definition on any mesh. 42% solids content. Exposes eight times faster than a diazo or dual-cure emulsion. Available in gallon containers. 

Applications:Garment printing with plastisol ink.

Characteristics:‹ Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity.‹ Exposes 8x faster than a diazo or dual-cure emulsion features/benefits.‹ 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts.‹ No mixing required and no diazo staining.‹ Water resistant when post exposed

Directions for Use: Handle under yellow safelight or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps. sensitizing and mixing Emulsion is presensitized during production and does not require mixing.

Mesh Preparation & Degreasing: Degrease and abrade new mesh with Saati Chemicals Direct Prep 1 in order to optimize stencil adhesion; dry and store the screen in a dust free, dry environment prior to coating. For more applications, thoroughly degrease the mesh prior to use with Saati Chemicals Direct Prep 2. Coating Using a high quality scoop coater or coating through, apply one or two coats to the substrate side of the screen, followed by one or two coats on the squeegee side.

Drying & Storage: Thoroughly dry the coated screen at a maximum temperature of 104°F (40°C) in a dust free, dark or yellow light area, with the substrate side facing down to optimize stencil quality. Coated screens should be stored in a dust free, dry, safelight environment.

Exposing: Ensure that all surfaces, emulsion, film and glass are free of dust to minimize pinholes. Contact the emulsion side of the positive with the substrate side of the screen and secure in position before placing the screen in a suitable vacuum frame. Many variables, such as lamp type and age, distance from lamp to screen, mesh type and coating thickness, can affect exposure time. Developing Wet both sides of the screen with a strong, finely divided spray of water and continue washing out until all image areas are fully open. Rinse both sides of the screen and dry thoroughly before use.

Post exposing: Post expose with daylight or exposure lamp to produce a more water-resistance stencil.

Reclaiming: Remove all ink residues immediately after printing with either Saati Chemicals Ink Remover IR4 or IR5. Remove stencil with Saati Chemicals Emulsion Remover ER2. For stains and ghost images, use Saati Chemicals Haze Remove HR5 followed by a pressure washer.

 


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


You Recently Viewed...