QUART - Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Water resistant when post exposed. Requires no mixing!Excellent print definition on any mesh. 42% solids content. Exposes eight times faster than a diazo or dual-cure emulsion. Available in gallon containers.
Applications:Garment printing with plastisol ink.
Characteristics: Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Exposes 8x faster than a diazo or dual-cure emulsion features/benefits. 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts. No mixing required and no diazo staining. Water resistant when post exposed
Directions for Use: Handle under yellow safelight or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps. sensitizing and mixing Emulsion is presensitized during production and does not require mixing.
Mesh Preparation & Degreasing: Degrease and abrade new mesh with Saati Chemicals Direct Prep 1 in order to optimize stencil adhesion; dry and store the screen in a dust free, dry environment prior to coating. For more applications, thoroughly degrease the mesh prior to use with Saati Chemicals Direct Prep 2. Coating Using a high quality scoop coater or coating through, apply one or two coats to the substrate side of the screen, followed by one or two coats on the squeegee side.
Drying & Storage: Thoroughly dry the coated screen at a maximum temperature of 104°F (40°C) in a dust free, dark or yellow light area, with the substrate side facing down to optimize stencil quality. Coated screens should be stored in a dust free, dry, safelight environment.
Exposing: Ensure that all surfaces, emulsion, film and glass are free of dust to minimize pinholes. Contact the emulsion side of the positive with the substrate side of the screen and secure in position before placing the screen in a suitable vacuum frame. Many variables, such as lamp type and age, distance from lamp to screen, mesh type and coating thickness, can affect exposure time. Developing Wet both sides of the screen with a strong, finely divided spray of water and continue washing out until all image areas are fully open. Rinse both sides of the screen and dry thoroughly before use.
Post exposing: Post expose with daylight or exposure lamp to produce a more water-resistance stencil.
Reclaiming: Remove all ink residues immediately after printing with either Saati Chemicals Ink Remover IR4 or IR5. Remove stencil with Saati Chemicals Emulsion Remover ER2. For stains and ghost images, use Saati Chemicals Haze Remove HR5 followed by a pressure washer.
Posted by Unknown on 5th Dec 2016
Excellent emulsion at a reasonable price
Posted by Aldin Konjic on 30th Sep 2015
Great quality emulsion!
Posted by Unknown on 22nd Sep 2015
Posted by Unknown on 6th Aug 2015
Washes out with next to no effort coats very easy and cleans are a snap.
Posted by Unknown on 10th Feb 2015
I love this product reduced my exposure time by 80% and works as expected cleans up fast too
Posted by Brandon Thomas on 19th Dec 2014
I have used many other emulsions but PV works the best been using it for 2 years now and Catspit has the best price too!!
Posted by Ki on 7th Jan 2014
Short exposing time compare to dual diazo emulsion. Awesome stuff! Will buy again. =)
Posted by Radio on 16th Nov 2013
This is great stuff. Works way better than the photo emulsion. Durable,tough,still washes out, etc. Using water base ink.
Posted by Unknown on 15th Jul 2013
This was a real step up from what we were using before. Precise exposures and 1/2 the time than our previous emulsion. Tanks again.