Loading... Please wait...

SaatiChem Textile PHU Blue Emulsion - Gallon

  • Image 1
Calculated at checkout

Product Description

GALLON - Blue pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Water resistant when post exposed. This is a blue general photopolymer emulsion for all ink types that can be used with plastisol, water-based, and discharge inks. Post cure for ultimate durability. 

Applications: All purpose solvent and water resistant photoemulsion.

Characteristics:‹ Blue one part pure photopolymer emulsion with universal ink resistance.‹ Exposes 8X faster than typical two part emulsions features/benefits.‹ 45% solids and high viscosity for easy coating and good bridging on all mesh counts.‹ Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim. ‹Recommended for use with discharge inks as is with post exposure.

Directions for Use: Handle under yellow safelight or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps. sensitizing and mixing Emulsion is presensitized during production and does not require mixing.

Mesh Preparation & Degreasing: Degrease and abrade new mesh with Saati Chemicals Direct Prep 1 in order to optimize stencil adhesion; dry and store the screen in a dust free, dry environment prior to coating. For more applications, thoroughly degrease the mesh prior to use with Saati Chemicals Direct Prep 2. Coating Using a high quality scoop coater or coating through, apply one or two coats to the substrate side of the screen, followed by one or two coats on the squeegee side.

Drying & Storage: Thoroughly dry the coated screen at a maximum temperature of 104°F (40°C) in a dust free, dark or yellow light area, with the substrate side facing down to optimize stencil quality. Coated screens should be stored in a dust free, dry, safelight environment.

Exposing: Ensure that all surfaces, emulsion, film and glass are free of dust to minimize pinholes. Contact the emulsion side of the positive with the substrate side of the screen and secure in position before placing the screen in a suitable vacuum frame. Many variables, such as lamp type and age, distance from lamp to screen, mesh type and coating thickness, can affect exposure time. Developing Wet both sides of the screen with a strong, finely divided spray of water and continue washing out until all image areas are fully open. Rinse both sides of the screen and dry thoroughly before use.

Post exposing: Post expose with daylight or exposure lamp to produce a more water-resistance stencil.

Reclaiming: Remove all ink residues immediately after printing with either Saati Chemicals Ink Remover IR4 or IR5. Remove stencil with Saati Chemicals Emulsion Remover ER2. For stains and ghost images, use Saati Chemicals Haze Remove HR5 followed by a pressure washer.


Find Similar Products by Category

Write your own product review

Product Reviews

  1. Great customer service and great product! 5 Star Review

    Posted by on 15th Oct 2015

    Great customer service and great product!

You Recently Viewed...